Bottles & containers
Blow-molded HDPE for milk, detergent, motor oil, and chemical jugs. Stiffness, low permeability, drop strength.
All Families
Family 01(C₂H₄)ₙ
Polyethylene.
The world's most produced thermoplastic.
Polyethylene accounts for roughly a third of all global thermoplastic output. Three structural variants — high-density linear chains, linear-low chains with short branches, and low-density chains with long random branches — produce vastly different mechanical behaviour from a single, simple monomer. We facilitate every grade across Gulf, North American, and Asian production.
Discuss requirementsPE grades in flow
PE grades in flow
- HDPE Blow
- HDPE Injection
- HDPE Pipe
- PE100
- PE100-RC
- LDPE Film
- LDPE Lamination
- LLDPE C4
- LLDPE C6
- LLDPE C8
- MDPE
- EVA
Applications
What it becomes
Where PE ends up.
Every line below traces a real, high-volume application we facilitate. No category we cannot quote.
Films & flexible packaging
LDPE and LLDPE films for shrink wrap, stretch wrap, agricultural mulch, and form-fill-seal pouches.
Pipes & infrastructure
Bimodal HDPE for potable water, gas distribution, and trenchless installations. PE100 and PE100-RC grades.
Drums & IBCs
Rotomolded and blow-molded jerricans, drums, and intermediate bulk containers for industrial logistics.
Geomembranes
HDPE liners for landfills, mining heap-leach pads, and reservoirs. UV-stable, chemically resistant.
Caps & closures
Injection-molded PE for bottle caps, dispensing valves, and threaded closures across food and chemical packaging.
Grades
The catalogue
Specifications, precisely.
A representative slice of what runs through our desk. Custom grades and tailored specs available on request.
01
HDPE Blow
Bimodal high-density grade for blow molding of bottles, jerricans, and large hollow parts.
MFI
0.3 – 1.0
02
HDPE Injection
Narrow MWD grades for high-throughput injection molding of caps, closures, and crates.
MFI
4 – 20
03
HDPE Pipe (PE100)
Black-pigmented bimodal grade for pressure pipe — gas, water, and trenchless installation.
MRS
10.0 MPa
04
LDPE Film
Long-branch low-density resin for general film, shrink, and lamination layers.
MFI
0.3 – 4
05
LLDPE C4
Butene-comonomer linear-low for stretch film, heavy-duty bags, and food packaging.
MFI
0.5 – 2.5
06
LLDPE C6 / C8
Hexene and octene comonomer grades for high-toughness films and rotomolding.
MFI
0.7 – 3
07
MDPE
Medium-density grade balancing stiffness and ESCR — gas pipe, films, and rigid containers.
Density
0.926 – 0.940
Source & Origin
Production geography
Where it comes from.
01
Middle East
Gulf petrochemical complexes (Saudi Arabia, UAE, Qatar) producing competitively-priced HDPE and LLDPE on Ethane-fed crackers.
02
North America
Shale-advantaged ethylene economics and the world's deepest LDPE and HDPE export capacity from the U.S. Gulf Coast.
03
Southeast Asia
Integrated complexes in Singapore, Malaysia, and Thailand producing both export volume and rapidly-growing domestic demand.
04
Europe
Specialty grades and recyclate-blended PE — particularly higher-end LDPE film and pipe-grade HDPE.
From our Insights
Recycled Polymers: A Buyer's Guide to rPET, rHDPE, and rPP
Recycled polymer demand is growing faster than supply. Here is what buyers need to know about grades, certifications, pricing, and the real-world limits of circularity.
ReadHDPE, LDPE, LLDPE: A Buyer's Guide to the Three Polyethylenes
Three resins, the same monomer, three very different supply chains. Here is how to tell them apart on the page and on the line.
ReadWhat MFI Actually Tells You (and What It Doesn't)
Melt Flow Index is the single number every polymer trader quotes and every junior buyer misreads. Here is what it really measures.
ReadSource PE
Need polyethylene?
Tell us what.
Send specifications, target volumes, and incoterm preferences. We will route the request to the appropriate desk and respond with indicative pricing.
Send a requestNext family
Polypropylene
Continue